Configuration 1 – For use with Gentex SPH/HGU Visor Shroud and Alpha Rigid Visor Cover.
Allows current issue/standard ANVIS Mount to be used between SPH/HGU and Alpha Helmets.
Figure 1
See Figure 1: Remove the existing attach bracket and install the PFG Attach Bracket and Side Car Adapter. See Figure 2 Below.
Figure 2
PFG Attach Bracket (MP01117SP)
PFG Side Car Adapter (SMCA)
Place PFG Side Car Adapter onto the PFG Attach Bracket as shown in figure 2.
Figure 3
Install the four key way studs through the PFG Attach Bracket and Side Car Adapter. Install the four locking screws and secure the ANVIS Mount power supply interface through the Side Car Adapter mounting bracket.
Figure 4
Configuration 1 (shown above) in Figure 4 – prepared for mounting.
Mounting Configuration 1 shown attached to SPH/HGU Visor Shroud
Mounting Configuration 1 shown attached to Alpha Rigid Visor Cover