Menu
A PACE Earphone Wire with extended length so that it can be used with Chemical/Biological Flight Equipment. Same performance with an extended cable.
The above illustration shows the approved USAF HGU-55/P with Combat Edge configuration for PACE. Configuration consists of: (PFG-PACE-1001) PACE 3.5 Earphone Cable, (PFG-PACE-1003) PACE Y-Tap Adaptor, and PFG PACE Custom Ear Pieces.
The Passive Attenuating Communications Earphone (P.A.C.E.) System provides a quality level of hearing protection without compromising the communications signal provided through your communications system.
Extremely low profile and behind the cranium design that eliminates cable snagging issues found in most under helmet/headset earphone systems. By using a more standard cable connection, the system can be used and tested with any device that utilizes a stereo connection. This system is full stereo and will provide left and right channel audio when connected to a stereo source of audio.
PACE has adaptors that allow it to be used with current aircrew systems without major modification to flight equipment or replacement of standard communication cords:
These adaptors work with helmets modified for SMB connector systems. There are three styles available, single-connection and dual-connection (used with hear-through systems).
These adaptors work with helmets modified for SMB connector systems. There are three styles available, single-connection and dual-connection (used with hear-through systems).
© 2023 Pro Flight Gear, LLC