XABH-9000 Aircrew Communications Systems Tester
All-In-One Helmet Tester For Aircrew Communications Systems Includes (1) U-I74 adapter, (1) U-I73 adapter, and (1) preset tool. Retail $1150.00
XABH-9001 Aircrew Communications Systems Tester with Case
All-In-One Helmet Tester For Aircrew Communications Systems Includes (1) U-I74 adapter, (1) U-I73 adapter, (1) preset tool, and Carrying Case. Retail $1200.00
XABH-9001-EPACS Aircrew Communications Systems Tester with Earphone Accessory
NSN: 4920-01-666-6577 All-In-One Helmet Tester For Aircrew Communications Systems with Earphone Accessory Cable Includes (1) U-I74 adapter, (1) U-I73 adapter, Earphone Accessory Adaptor (tests ACCES, CEP, or PACE), (1) preset tool, and Carrying Case. Contact PFG for details on Pricing if Military/Gov’t
All-In-One Helmet Tester
This helmet tester allows the user to test a variety of communication systems (helmets or headsets) as well as individual components to ensure that they are working properly. The versatility to test either components or systems sets the XABH-9000 apart from other aircrew equipment testers. Now you can know if your bench stock components (stock microphones, speakers, etc…) are in working condition.
Simplified Root Cause Testing of Malfunctioning Equipment
The XABH-9000 helmet tester allows you to isolate your testing from the whole system (NORMAL setting) to the microphone or speaker by itself (MIC or SPKR Test). With a built in microphone you can test the speakers by themselves using your own voice instead of relying solely on what the reading on the screen says. For testing microphones with the XABH-9000, the built-in speaker provides feedback from the microphone you are testing. The system will identify any microphone hooked up to it and be able to operate it, even if it requires bias power (i.e. electret microphones). These features vastly improve the ability to determine what is malfunctioning on a system and can isolate problems with the cabling versus the microphone or speaker. Such capability will make it far less likely that you dispose of a working component due to limited component isolation capabilities.
Customize the XABH-9000 Helmet Tester for the Equipment You Maintain
The XABH-9000 helmet tester allows you to set up to three different presets so that you can tailor the PASS/FAIL criteria for up to three different systems in your aircrew equipment shop. The preset will capture the levels for the good system’s speaker and microphone allowing quick GO/NO-GO checks of complete systems. Having multiple presets allows you cover helmets and/or headsets of different configurations within your shop.
The XABH-9000 helmet tester uses a variety of connectors so that you can test out headsets, helmets, and earphones with different connection requirements. Contact Pro Flight Gear about the connectors that are available.
The Helmet Tester has 3 Modes of Operation:
In normal mode, the tester will analyze the microphone and speaker to provide an indication what the resistance of those items are. This gives the operator an idea of whether or not the microphone or speaker are within the operational limits of the particular devices. This mode does not support testing of the systems through the device microphone (to provide audible indication of the tested microphone operating).
In the Mic (Microphone) Test position the tester will activate the tester speaker and allow the user to see the resistance of the microphone as well use of the microphone (speaking into it) to ensure that the microphone is operating correctly. This mode will power microphones (i.e. electret microphones) for testing as well.
In the Spkr (Speaker) Test position the tester will activate the tester microphone and allow the user to see the resistance of the speaker as well use of the speaker (transmitting what is broadcast by the tester microphone) to ensure that the speaker is operating correctly. This mode will test helmet, headset, and even earphone speakers.
There are three preset positions (PRESET A, PRESET B, PRESET C) on the tester that allows the user to customize the test parameters for their own equipment. The Preset acts the same way as the normal mode in that it will only give you a readout of the resistance of the connected system, but adds a “GOOD” or “BAD” indication based on the system’s preset parameters.
Care and Maintenance
The XABH-9000 helmet tester is intended to be stored and operated within the normal conditions found in a life support equpiment work room. The system should not be stored outdoors or in an aircraft or helicopter. It can be operated outdoors when desired, but should not be directly exposed to rain or snow. Check batteries at least every 30 days to ensure that no leakage has occurred from the batteries installed. This would cause damage to the battery compartment and battery terminals. Keep tester stored in the case provided to ensure the best protection from damage. Calibration of the system is not required.