pro-flight-gear-helo-banner

ALPHA NVG Configurations

Pro Flight Gear Red Bar

PFG NVG Flight Helmet Mounting Configuration - 1

Configuration 1 – For use with Gentex SPH/HGU Visor Shroud and Alpha Rigid Visor Cover.

Allows current issue/standard ANVIS Mount to be used between SPH/HGU and Alpha Helmets.

Figure 1

pro-flight-gear-nvg-mount-back
pro-flight-gear-nvg-mount-attachment-plate

See Figure 1: Remove the existing attach bracket and install the PFG Attach Bracket and Side Car Adapter. See Figure 2 Below.

Figure 2

pro-flight-gear-nvg-mount-attach-bracket-mp01117sp

PFG Attach Bracket (MP01117SP)

pro-flight-gear-nvg-mount-side-car-adapter-smca

PFG Side Car Adapter (SMCA)

pro-flight-gear-nvg-mount-attach-bracket-and-side-car-adapter-mounting-bracket

Place PFG Side Car Adapter onto the PFG Attach Bracket as shown in figure 2.

Figure 3

Install the four key way studs through the PFG Attach Bracket and Side Car Adapter. Install the four locking screws and secure the ANVIS Mount power supply interface through the Side Car Adapter mounting bracket.

pro-flight-gear-nvg-mount-assembled

Figure 4

Configuration 1 (shown above) in Figure 4 – prepared for mounting.

pro-flight-gear-nvg-mount-front
pro-flight-gear-nvg-mount-sph-hgu-visor-shroud

Mounting Configuration 1 shown attached to SPH/HGU Visor Shroud

pro-flight-gear-nvg-mount-alpha-eagle-rigid-visor-cover

Mounting Configuration 1 shown attached to Alpha Rigid Visor Cover

Shopping cart0
There are no products in the cart!
Continue shopping
0